Home :: JACE/M2M :: JACE MODULES :: MBus 10 - Converter M-Bus Master to RS 232

MBus 10 - Converter M-Bus Master to RS 232

MBus 10 - Converter M-Bus Master to RS 232
Larger Image Connection drawing
0.10 Kgs
Our price:
£117.60 (137.59)
including VAT 20.00 % ( £19.60 )

MBus 10 converter is a transparent converter from RS232 to MBus interface. On MBus side it works as MBus master and enable to connect maximum 10 standard MBus receivers (slaves). It can be used with all devices equipped with MBus interface like: heating energy meters, electric energy meters, data recorders and many others with MBus interface.

mBus 10 converter is equipped with TX, RX and Power supply LED indicators. There are screw terminal block connectors on Power supply and MBus (5 pin) and RS232 (4 pin) side for connection.

MBus 10 can successfully replace PW3 Relay M-Bus level converter or any other M-Bus master converter.
Can be used with all the Tridium JACE controllers. Because the MBUS unit supply is 12VDC - 25VDC and uses 250mA you can use the M2M PB+ and PB- to power this MBUS unit. If you are powering up the JACE2/6 with a 16VDC power supply you can use this for the MBUS10 supply or if you have a 24VAC control system, then you can use the 24VAC to 24VDC converter at 


Construction - RS-232/MBus Converter; Ethernet option

Input Interface
Interface - RS-232; Ethernet option
Connector - Screw Terminal Block (3 pin)

Output Interface
Output Interface - MBus
Port number - 1
Maximum baudrate - 300 do 19200 baud/sec
Connector - Screw Terminal Block (5 pin)
Output Configuration
Interface - MBus
Maximum M-Bus slave number - 10

I/O Configuration
Hardware Data Direction Control - No
Automatic Data Direction Control - Yes

Opto Isolation
M-Bus - Power Supply - No
M-Bus - RS 232 - 100V AC/DC
Power Supply - RS 232 - 100V AC/DC

Surge Protection / Over Voltage Protection
M-Bus Interface - 43V 600W/1ms

LED Indicators
Data Transmission - 2xLED (Tx-Yellow, Rx-Green)
Power Supply - LED (Red)

Power Supply Conditions
Voltage - (+12 - +25)Vdc
Current - 0.25 A max

Operating Conditions
Temperature - 0...+40°C

Dimensions and Weight
Dimensions (Depth x Width x Height) - 60x34x90mm
Weight - 0.1kg

: *
: *
: *
230Vac to 24Vac transformer 25VA
10 Nm 230V 3 point On-Off
0/10Vdc Split Core Current Sensor, 0-10, 0-20, 0-50 A
Analogue Output Space Temperature Sensor - 4-20mA output -10...+40C
Inside Light Sensor 0-1000 lux -10v output
Frost Protection Thermostat
Manual reset frost protection thermostat
100m Roll of 4 core Belden

Product rating

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture: